ミントリフトに失敗3つと修正手術が上手い病院のご紹介

メスが不要で糸の強度と持続性も向上

ミントリフトは、糸を使用して顔のたるみを改善するフェイスリフトの一種です。

これまでのフェイスリストは、糸に切り込みを入れて皮膚の内部に引っ掛けるという内容でしたが、ミントリフトに使用するものは、糸に棘状の突起をつけています。これにより、メスが不要となり、糸の強度と持続性も向上することになります。

また、糸を挿入するとコラーゲンが生成されるようになるので、肌のハリや潤いの良化にも期待することができます。

なお、ごくまれに、糸が顔の組織内で切れてしまい、エクボのような凹みが出来てしまうことがあります。

この凹みは時間とともになくなることも多いのですが、修正しなくてはならない場合もあります。

糸を使ったリフトアップの施術は、ドクターの技術力の差が出やすいので、受診したクリニックに固執するのではなく、幅広い選択肢の中から見つけ出すのが適当です。

その際に参考となるのが、実際に修正治療を受けた利用者による口コミで、どうすれば良いのかの指標として利用できます。

こちらの記事ではミントリフトの失敗例や修正についてご説明致します。

上手な医師・クリニックの特徴

ミントリフトの失敗例のなかには医師の腕が関わっているものもあります。ミントリフトの治療には高い技術が求められます。

切開の必要がないので、簡単な治療だというイメージがありますがそれは誤りです。

未熟な医師の治療によって思いもよらないトラブルを抱えてしまうケースも少なくありません。

それだけ医師選びは重要な作業であると言えます。未熟な医師と経験のある医師では仕上がりに差ができることがあります。

顔や表情は相手に与える印象を大きく変える部分です。

仕上がりに差ができてしまうと、思わぬ印象を与えてしまうかもしれません。

それだけにミントリフトの治療は慎重に進めていくことが必要です。多少時間が掛かったとしても、上手な医師に治療を行ってもらうことが大切です。

上手な医師は豊富な経験と知識を持っています。

ミントリフトの際に生じる可能性のあるリスクについても事前に相談し、安心した状態で治療に望むことが重要です。未熟な医師のもとで治療に望むのは非常に危険な判断です。

ミントリフトを行う医師が増えてきたからこそ、自分の目でしっかりと見極めなくてはなりません。

時間が掛かったとしても上手な医師のもとで治療に臨むことをおすすめします。

失敗例

ミントリフトは、糸を使って切らずにたるみを解消するリフトアップ術です。従来のたるみ治療で使用される糸は、棘の入った切り込み型が多く、強度や持続性に欠けるのが難点でした。

しかし、ミントリフトで使用される糸は羽を付けたような特殊な糸であり、強度は従来の8倍で、持続性は3倍にまで高められています。そのため、たるみ治療の中でも、驚異的なリフトアップ力と持続力でしっかりとフェイスラインを引き上げてシャープな印象にしてくれます。

しかも、糸を挿入することでコラーゲンやエラスチンの生成が促進されるので、肌のハリやツヤもさらにアップしますし、この糸は、外科手術にも使用されている体内で溶ける成分で作られており、アメリカFDAで認定されるほど安全性も高いのです。このように、この施術はしっかりとたるみを引き上げるリフトアップ力と安全性の高さが大きな特徴ですが、もし、施術を検討するのなら、失敗するケースについても知るべきです。どのような失敗が考えられるのでしょうか。

ミントリフトに失敗したらどうなってしまうの?

皮膚が凸凹になったり引きつれなどが生じて不自然な表情

ミントリフトは、強度と持続性の高い特殊構造の糸でしっかりとたるんだ皮膚を引き上げてシャープなフェイスラインを作り出すこと出来る施術です。ミントリフトは、安全性の高い溶ける糸を使用するのが大きなメリットのひとつと言えますが、それでも、失敗するケースがいくつか考えられます。

まず、皮膚が凸凹になったり引きつれなどが生じて不自然な表情になることもあります。また、ミントリフトは溶ける糸を使用したリフトアップ術なので、糸が溶けて吸収された後は、リフトアップ効果が弱まってしまうこともあります。そして、ごく稀にですが、糸が顔の組織内で切れてしまって、まるでエクボのようなくぼみになってしまうことがあります。

ただし、このくぼみは時間の経過と共に消失することが多いです。糸を使用したリフトアップ術は、施術を行う医師の技術力によって仕上がりが大きく変わります。そのため、重要なのは、技術力の高い名医を選択して施術に臨むことです。

ミントリフトに失敗、「効果が持続しない」事に後悔…。

せっかく受けたのに効果が持続しないことがあります。

切開手術をするリフティングは半永久的に効果が続くのでたるみをしっかり解消できますが、糸で引き上げるタイプの施術は簡単に受けられる一方で効果が持続しないというデメリットがあります。特に溶ける性質のある糸で行うミントリフトは糸の周りにしっかりコラーゲンやエラスチンが生成されないとハリや弾力が戻らず、たるみもそのままで施術前と施術後でほとんど見た目が変わらないという結果になる人もいます。

挿入したはずの糸が透けて見えることも

極細タイプの針を使って皮膚の奥に挿入したはずの糸が、時間が経つと表面に浮かびあがってしまい糸が透けて見えるという症例もあります。糸の周囲に細胞が育つ前の不安定な時期に大きく笑ったり顔の筋肉を使うと糸が動いて表面に出てきてしまったり、挿入した髪の毛の生え際部分の肌が浅いところがでこぼこになって見た目がおかしくなったりする危険があります。気になったらすぐ施術を受けた病院で相談しましょう。

糸の入れ方によっては顔がひきつれ・笑顔が不自然になる

針の穴を目立たせないように髪の毛の生え際を利用して挿入するため、糸がしっかり引き上げたい部分に到達しなかったり変な方向に入ってしまったときは顔がひきつれ・笑顔が不自然になってしまう危険があります。顔の筋肉を動かしたくても自分の意志と無関係に引っ張られたり、目元や口元の特定の部分だけが常につっぱったような状態になってしまい、笑ったときにおかしな表情になったり痛みを感じることもあります。

ミントリフトの失敗

ばれない美容整形を試したい人におすすめ

ミントリフトは切開をしないでできる方法で、頬など顔の表面に針を刺すのではなく髪の毛で隠れる部分から糸を挿入するので施術直後でも傷跡が全く見えず、誰にもばれずにリフトアップができる便利な方法です。

周囲に気付かれずに美容整形をしてみたい人におすすめで、ダウンタイムも短いので忙しくても気軽に受けられます。

痛みはほとんど感じないので初心者でも安心で、少しだけ整形したい人にも向いています。

「上手いクリニック」「おすすめの病院」の紹介はこちらから

ミントリフトを行っているクリニックは増加傾向にあります。そのため、クリニックも自分に合った場所を自分自身で選ばなくてはなりません。

クリニックにはそこまで差はないのではないかと考えている方もいるかもしれません。

しかし、残念ながらクリニックにも良し悪しは出てきてしまいます。

自分に合っていないクリニックに無理して通うことはせず、自分に合ったクリニックを探すことが重要です。

こちらも調べるのに少し時間がかかるかもしれません。

ですが、自分に合わないクリニックで手術を受けた結果、修正を繰り返す日々になるかもしれません。

そういった事態を未然に防ぐためにもしっかりとしたクリニック選びが重要になってきます。

おすすめのクリニックはカウンセリングを時間を掛けて行っているクリニックです。

カウンセリングはクリニックによって、大きく違いが出てくる部分です。

治療前に親身になって相談に乗ってくれるのかをしっかりと自分の目で判断したいところです。

場所によってはカウンセリングにあまり時間を割かないクリニックもあります。不安が解消されないまま、治療に望むのは危険です。

修正を繰り返す日々にならないように治療前にしっかりとしたカウンセリングを行ってくれるクリニックを選ぶことが重要です。

フェイスリフトとプチ整形の名医-失敗と効果

The following two tabs change content below.
美容整形の名医相談所には、整形に失敗して修正したいという患者様から多くご相談が来ております。失敗をしないためお医師選びと名医をご紹介しています。ご相談はお気軽にどうぞ。

“ミントリフトに失敗3つと修正手術が上手い病院のご紹介” への4,475件のフィードバック

  1. US production is at about 150 million metric tons every year, with about 85 million of those tons being recycled iron and steel.

  2. Other metals that produce large amounts of scrap include aluminum, copper, stainless steel, lead, and zinc.

  3. Benefits of Recycling Recycling has become increasingly important to society and industry to meet the goals of cost reduction, efficient management of limited resources, and reduced landfill utilization.

  4. Scrap metal may, in fact, be one of our most precious resources.

  5. In addition, using scrap metal in lieu of virgin ore generates 97% less mining waste and uses 40% less water, according to the National Institute of Health.

  6. These emissions may influence climate change and may also cause harmful levels of air pollution in cities, resulting in potential respiratory health problems for you and other residents.

  7. The production of new metal releases a far greater amount of greenhouse gas emissions compared with making products from recycled metal.

  8. The Institute of Scrap Recycling Industries (ISRI) reports that recycling metal may cut greenhouse gas emissions by 300 million to 500 million tons.

  9. We are accustomed to hearing about recycling in general; however, many people do not know important it is to recycle all metal as well.

  10. Gebze Hurda より:

    including in the US.7 Given the international nature of scrap trade, it would be preferable if stakeholders could agree on a global classification to make best use of the expected strong growth in scrap availability and use.

  11. Gebze Hurda より:

    However, some elements, especially copper, cannot be removed during the steelmaking process

  12. Gebze Hurda より:

    The steelmaking process is able to remove most impurities that may be present in scrap steel

  13. Gebze Hurda より:

    Looking forward, the continued growth of the circular economy may lead to further extensions in the useful life of steel products through reuse and remanufacturing, suppressing scrap availability below current expectations.

  14. Gebze Hurda より:

    There are several regional classifications used to classify scrap – for example, the ‘The EU-27 Steel Scrap Specification

  15. Gebze Hurda より:

    While iron ore supply can flex with demand, the availability of scrap is mostly fixed, a function of steel demand and arising of scrap at the end of life of steel products, equipment and facilities

  16. Gebze Hurda より:

    We expect that global end-of-life scrap availability will reach about 600 Mt in 2030 and 900 Mt in 2050, a growth of more than 500 Mt in one of our main steelmaking raw materials in the next 30 years.

  17. Gebze Hurda より:

    worldsteel estimates suggest that global end-of-life ferrous scrap availability stood at about 400 Mt in 2019.

  18. High temp alloys offer surface stability, environmental endurance, and resistance to oxidation.

  19. They use hi temp alloys for example, manufacturing boiler drums, tubing for water boilers, pumps and pressure vessels, collectors, aircraft engines, and high-temperature turbines.

  20. We purchase and recycle all types of scrap metal such as Aluminium,

  21. Copper, Stainless steel,Brass, scrap Iron, Lead, Zinc and all industrial equipment.

  22. Recycling alloys such as Nickel, Carbide, Inconel, Indium, Rhodium, Titanium, Hastelloy, Molybdenum, Cupronickel.

  23. We will meet all of your recycling needs servicing Orange county and Los Angeles County with Roll off dumpsters,

  24. Recycling alloys such as Nickel, Carbide, Inconel, Indium, Rhodium, Titanium, Hastelloy, Molybdenum,Cupronickel.

  25. The scrap industry was valued at more than $90 billion in 2012, up from $54 billion in 2009 balance of trade, exporting $28 billion in scrap commodities to 160 countries.

  26. that contain Precious metals or precious compounds. Materials contain platinum, palladium, rhodium, rhenium, iridium, ruthenium, gold, and/or silver.

  27. Recycling metal is easy due to the fact that we will customize a specific plan to collect process and recycle your scrap metal and obsolete surplus or RMA products.

  28. precious metal refining of multiple types and forms filter, sludges, honeycombs, solutions, anodes, targets, turbine blades and x-ray film

  29. Scrap metal recycling has never been easier our scrap prices are based on current Comex and L.M.E markets for Global prices.

  30. Gebze Hurda より:

    The average lifespan of a steel product is 40 years.

  31. Gebze Hurda より:

    This is because of the long service life of steel products, given steel’s strength and durability.

  32. Gebze Hurda より:

    With a total of 720 Mt, ferrous scrap recycling constitutes the largest recycling activity in the world.

  33. Gebze Hurda より:

    Any future increase in availability will be drawn from the expected increase of post-consumer scrap availability.

  34. Gebze Hurda より:

    The average life of steel products ranges from a few weeks for steel packaging to up to 100 years for buildings and infrastructure

  35. Gebze Hurda より:

    Global steel production increased significantly in the early years of the 21st century, largely driven by growth in China.

  36. Gebze Hurda より:

    Continued growth in steel demand means that transitioning the industry to entirely scrap based production is unlikely to be possible during this century.

  37. Gebze Hurda より:

    5 This means there is a significant delay between steel being produced and being available for recycling.

  38. Gebze Hurda より:

    Every steel plant uses scrap as part of its raw materials mix, and therefore every steel plant is also a recycling plant.

  39. Gebze Hurda より:

    Scrap acts as a cooling agent, absorbing excess heat from the exothermic decarbonisation process, and also as a source of iron units. In some cases, scrap is added directly to the BF as a source of iron units, reducing greenhouse gas emissions.

  40. Gebze Hurda より:

    Melting steel scrap at the end of its useful life allows us to create new steels, making adjustments to the chemistry and shape of the new product. Scrap steel is separated and sorted, and can be used to make any new steel product.

  41. Gebze Hurda より:

    In blast furnace (BF) steelmaking, each charge of the basic oxygen furnace, in which carbon carbon-rich pig iron is refined into crude steel, typically contains 15%-25% scrap.

  42. Gebze Hurda より:

    Around 650 Mt per year of scrap is consumed each year for steel production (compared with a total crude steel production volume of 1,869 Mt per year), with comparable amounts of scrap used in the primary and secondary routes.

  43. Gebze Hurda より:

    In electric steelmaking, electrical energy is used to re-melt charges of up to 100% scrap2 to make new steel products.

  44. Gebze Hurda より:

    Due to its inherent magnetism, steel is very easy to separate and recycle, making steel the most recycled material in the world.

  45. Gebze Hurda より:

    All the scrap that is available to the steel industry is used repeatedly to create new steel. Recycled steel maintains the inherent properties of the original steel and the quality can also be improved on recycling.

  46. Gebze Hurda より:

    While the term ‘scrap’ may lead one to believe this is a waste product, it is actually a valuable raw material used in every steelmaking process.

  47. Gebze Hurda より:

    There is no single solution to CO2 -free steelmaking, and a broad portfolio of technological options is required, to be deployed alone, or in combination as local circumstances permit.

  48. Gebze Hurda より:

    This series of fact sheets describes and explores the status of a number of key technologies and initiatives and issues.

  49. Gebze Hurda より:

    The transition to a low-carbon world requires a transformation in the way we manufacture iron and steel.

  50. game suppliers より:

    Nice bro thank you.

コメントを残す

メールアドレスが公開されることはありません。